Roll Up Garage Door Opener: Which one in 2023?

Roll-up garage door openers are installed on roll up garage doors. There is a big chance that these doors are made of horizontal sheets of steel, but other materials are used also. Roll up garage doors don’t run on a horizontal track system. When a roll up door is opened, the steel sheets coil up in a roll at the top of the inside of the garage. Just like a standard garage door, roll up garage door opener makes these doors more convenient and easy to use.

Table of Contents

Unlike standard garage doors, there isn’t much to choose when talking about roll up garage door openers. However, if you want, you can purchase and install an automated roll-up opener on your garage door. In the text that follows, I’m going to explain how to install and set up roll up garage door opener and what are the best options for your garage.

What is a Roll Up Garage Door Opener?

Although the term roll up door opener may seem unfamiliar but you’ve likely seen them a lot at distribution centers, rental centers, and government structures. Garage rool up door openers are composed of steel in horizontal sheets and don’t operate along a horizontal track. Instead when the door is opened the steel sheets roll upwards in a roll on high up on the interior door with the help of a motor.

Rool up garage door opener
Roll up garage door

There are two kinds of roll-up garage doors:

  • Roll-up sheet doors: Mostly found in backyard sheds, mini-warehouses loading docks and storage facilities. Sheet doors are constructed of an entire section of metal. They are best utilized for light commercial applications and are also the least expensive kind of garage door.
  • Rolling steel doors: These doors might look similar the previous one, however they’re not the same. This door composed of slats of steel instead of one huge sheet of steel. The doors are typically utilized in high-security and industrial areas, such as factory windows, pharmacy counters as well as transit facilities.

Which Roll Up Garage Door Opener to choose?

You have many options to choose from but you have to find the right door and motor altogether to fit best your garage, taste and budget. An automatic roll up garage door opener is a set of different parts, but we assume you already know that.

Check out more about wall mounted garage door openers.

We have reviewed some of the best roll up garage door opener for you in details, to help you choose the one that most suits your garage. We picked those brands:

Chamberlain

The Chamberlain model is our favourite, and we have 2 extensive reveiws about:

Genie

The Genie garage door openers provide the ultimate combination of reliability and strength:

Beam UP

These garage door openers are the most sold and distributed all over the US:

Check out Chamberlain vs Genie garage door opener.

Roll-up doors can be found in a wide range of commercial as well as residential uses. You can check this extensive guide to learn more on what to look when buying.

How to install a Roll Up garage door opener?

How to automate a roll up garage door

Time needed: 3 hours

How to Automate A Roll Up Garage Door?

  1. The tools you will need

    Tools you need for this job: Drill, Flat-head screwdriver, 7mm and 13mm Spanner, Phillips screwdriver, 3mm Steel bit, Pencil, 5mm Masonry bit, 2x Adjustable wrenches.tools needed for Roll Up automated door

  2. Installing the garage door motor kit

    The garage door motor kit consists of two main parts: the control box and the drive unit. First, make sure to disconnect all the wiring. That way you have easy access and it all makes it easy to continue.roll up garage door motor kit

  3. Installing the motor

    The next step is installing the motor. This is where help comes in handy. Lose the U-bolts and unwind the spring, with the wrenches while the door is closed… Once the spring is slack, remove the U bolt on the side where the motor goes. Check that the motor is disengaged. Lift the door axle slightly and slide the motor into the axle. Slide the U bolt in place and reset the tension of the spring. Tighten the U bolts. Now the motor is installed. It is time for the next step.Roll Up motor install

  4. Installing the controller

    Use the template to drill holes. Insert the plastic plugs and screws. Tight the screws so that the control box sits flushed.install the control box

  5. Attaching the weighted bar

    The next thing is attaching a weighted bar on the inside of the door at the bottom.weighted bar installation

  6. Programming the closed and opening

    Open the control box and connect the cables. Plug the motor into the main power supply. Now you’re ready to test the opener and to program the remotes. Watch the video above for more details.programing roll up opener

Roll Up Garage Door Motor Kit
Roll Up Garage Door Motor

Questions and Answers

Can you make roll up door automatic?

The roll up garage doors can be automated for ease of entrance. They function quite similarly to modern garage doors, with some design-related differences. Roll up door uses a specially designed motor to operate.

Can you add a motor to a roll up garage door?

Yes, you can add a motor to operate a roll up garage door. By using a motor, entering and leaving a garage can be easier than ever. With just one press of a button, you can open and close your door.